CGI Windows & Doors in Fort Lauderdale, FL

CGI Windows & Doors in Fort Lauderdale, CA | Hale Windows & Doors

We provide independent CGI window and door service across Fort Lauderdale, from Sailboat Bend to Harbor Beach. What makes our CGI work here different is simple: we know the High-Velocity Hurricane Zone code inside out, and we’ve seen what salt air does to aluminum frames year after year. So when your CGI Series 4000 or sliding glass door starts showing its age, we know exactly what to look for and how to fix it right. Call (252) 675-6980 for a free estimate on any Window Repair - Fort Lauderdale or replacement.

Call (252) 675-6980

Why Fort Lauderdale Residents Choose Us for CGI Service

CGI makes a serious impact window, but no brand survives Fort Lauderdale’s salt and sun without proper upkeep. That’s where we come in. Our team services CGI products across the city’s coastal and inland neighborhoods, from the 1920s masonry bungalows in Sailboat Bend to the high-rise condos along the Intracoastal. We’ve replaced corroded frames, resealed cloudy impact glass, and rebuilt sliding door tracks in enough Fort Lauderdale homes to know the failure patterns before we even open the sash.

We’re independent specialists, not a manufacturer-authorized dealer. That matters because we tell you the truth about repair versus replacement without a brand quota pushing us one direction. Spencer Odell, our owner, grew up re-glazing single-pane windows in Eagle Rock and trained at Los Angeles Trade-Technical College. He’s been setting windows and doors across coastal markets for going on two decades, and he built Hale Windows & Doors on a simple rule: measure twice, order once, then make sure the opening was built to code in the first place. For more on our work with this brand, see our CGI sales & service page.

Common CGI Windows & Doors Problems We Solve in Fort Lauderdale

• Corroded aluminum frames and pitted hardware. In coastal Fort Lauderdale neighborhoods like Las Olas and Harbor Beach, salt spray eats at standard aluminum finishes fast. We see pitting and discoloration on CGI frames within three to five years. The fix usually means replacing damaged hardware with marine-grade stainless steel components and applying heavier anodized finishes where the frame is still sound.
• Failed weatherstripping and seals on sliding glass doors. Fort Lauderdale’s monsoon rains and wind-driven storms find every weak seal. Water intrusion through a worn CGI Series 8000 sliding glass door is one of the most common calls we get after a heavy summer downpour. We replace the weatherstripping with UV-stable materials and realign the door so the seal actually seals.
• Cloudy or fogged insulated glass units. Intense sun and humidity break down the perimeter seals on impact glass over time. When the seal fails, moisture gets between the panes and the glass fogs. On CGI units, we can often replace just the insulated glass unit rather than the entire frame, which saves real money.
• Worn rollers and tracks on horizontal rollers and sliding doors. Salt air and sand grit work into the tracks of CGI Series 6000 horizontal rollers. The door gets harder to slide, and eventually the seal loses compression. We clean, realign, and replace rollers with materials rated for the coastal environment.
• Stripped or seized hardware on impact windows. Constant humidity and salt exposure cause screws, locks, and hinge points to corrode and bind. A locked-shut impact window is a safety problem. We free up or replace the affected hardware so the window opens smoothly and still locks tight when a storm comes.

CGI Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment

Here’s what changes everything for CGI owners in Fort Lauderdale: the city sits inside the Florida Building Code’s High-Velocity Hurricane Zone, and Broward County enforces an enhanced inspection process that often includes a mid-installation inspection. That means when we replace a CGI window or door in Fort Lauderdale, the inspector comes out while the unit is still in the opening, before we finish the trim. Every replacement window and door needs a Miami-Dade NOA or Florida Product Approval, and the paperwork has to match the unit actually going in. This adds a step and sometimes a day to the job, but it’s the reason Fort Lauderdale homes survive storms that flatten other parts of the state. In Sailboat Bend, we replaced a set of failed CGI Series 4000 single-hung impact windows in a 1940s masonry bungalow where the original units had corroded frames and faulty glass seals. The new CGI impact windows went in with marine-grade stainless steel hardware and heavier anodized finishes, and the homeowner passed the Broward County inspection on the first try. He also noticed how much quieter and cooler the home felt the same week.

CGI Models & Products We Service in Fort Lauderdale

We service the CGI models most common in Fort Lauderdale: the Series 4000 Impact Single Hung, the Series 6000 Impact Horizontal Roller, and the Series 8000 Impact Sliding Glass Door. When a part is available from CGI, we use the OEM component to maintain fit and warranty compliance. For older units where CGI no longer supplies the part, we source high-quality aftermarket components that meet or exceed Florida Building Code standards. We keep common CGI hardware, rollers, and weatherstripping stocked locally so most Fort Lauderdale service calls get handled without waiting on a long out-of-state shipment.

CGI Service Pricing in Fort Lauderdale

Do CGI windows meet Fort Lauderdale’s HVHZ requirements?

Yes, when properly specified and installed, CGI impact windows meet the Miami-Dade HVHZ requirements and carry a Miami-Dade NOA or Florida Product Approval. The catch is that the unit must be installed to the exact tested configuration, and Broward County inspectors in Fort Lauderdale verify this with a mid-installation inspection. Buying an approved product is only half the job. The installation details matter just as much.

How often do CGI window seals fail in Fort Lauderdale’s climate?

In our experience, CGI insulated glass seals in Fort Lauderdale start showing failures between 8 and 15 years, depending on sun exposure and how close the home sits to salt water. Units facing south or west with direct afternoon sun tend to fail sooner. Once the seal goes, the glass fogs and the only real fix is replacing the insulated glass unit. If you’re seeing haze between the panes, call (252) 675-6980 and we’ll tell you what replacement will cost before anyone shows up.

Can you repair corroded CGI window frames or is replacement necessary?

It depends on how deep the corrosion runs. Surface pitting on the frame can often be cleaned, treated, and refinished with a heavier anodized coating. If the corrosion has eaten through the frame wall or compromised the corner welds, replacement is the safer call. In Fort Lauderdale’s coastal air, we lean toward replacement when the frame’s structural integrity is in question. A window that fails during a hurricane is not something we’re willing to leave in your home.

What is the Broward County enhanced inspection process for window replacements?

For Fort Lauderdale Window Replacement, Broward County requires a permit, a product approval match, and typically two inspections: one during installation and one after the job is complete. The mid-installation inspection happens while the window or door is still exposed so the inspector can verify the anchoring and flashing details match the NOA. This is stricter than most Florida markets and it’s why we document every step before we call for inspection.

Do you service CGI windows in high-rise condos along the Intracoastal?

Yes. We service CGI windows and sliding glass doors in Fort Lauderdale high-rise condos along the Intracoastal and the beach. Condo work often involves building management coordination, insurance certificates, and specific installation windows, but we handle that process from permit to final inspection. If your association needs documentation, we provide it. Call (252) 675-6980 and we’ll get the details sorted.

Service Areas Near Fort Lauderdale

While most of our CGI work stays within Fort Lauderdale, we also take calls from nearby communities. Our Fort Lauderdale service area page covers all the details. We also run CGI-specific service routes through Glendale and Ontario for clients who’ve moved or own property in both markets. See our CGI service in Glendale and CGI service in Ontario pages for those areas.

Book Your CGI Service in Fort Lauderdale Today

Call (252) 675-6980 to schedule your free CGI service estimate in Fort Lauderdale. We’ll send a written price before any work starts, and every repair carries a written guarantee. If it fails, the second visit is free. That’s the 365-Day Done Right Promise, stamped on every job we do.

Written by Spencer Odell, Owner at Hale Windows & Doors, serving Fort Lauderdale since 2009.