Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindow Company in Broadview Park, FL
Hale Windows & Doors is the window company Broadview Park homeowners call when concrete-block construction, hurricane code, and aging 1950s jalousies turn a simple swap into a masonry retrofit. Our crews work on the original single-story ranches that define this unincorporated Broward County pocket every week, so we know the rough openings are rarely standard and the stucco always needs attention. Every job starts with a written price and a named, photo-badged technician. Call (252) 675-6980 for a free estimate.
Why Broadview Park Homes Are Different
Broadview Park is not inland Florida. It’s a low-lying, canal-adjacent community wedged between Fort Lauderdale and the Everglades, and nearly every home is a modest 1950s-to-1970s concrete-block ranch on a slab. That solid masonry shell is why replacements here hinge on masonry-anchored frames, careful stucco repair, and bucking out original window openings rather than standard insert work. The original jalousie and aluminum single-hung windows were built for cross-breeze, not hurricane protection, and many still sit in their original openings with non-standard rough openings underneath.
All replacement windows and exterior doors in Broadview Park must meet Florida Product Approval and Miami-Dade NOA impact standards. Add the area’s high water table and heavy summer rain, and watertight flashing and rust-proof fastening stop being nice-to-haves. They’re the job. We plan every Broadview Park quote around those two realities: impact-rated product selection and installation that holds up to wind-driven rain on a canal lot.
Our home team coordinates scheduling and dispatch from the brand’s Miami (South FL) office, with crews serving Broadview Park directly.
Our Main Broadview Park Services
Most Broadview Park calls start with two concerns: water getting past old windows, and front doors that no longer close square in swelling concrete-block openings. Below are the three services our crews handle in Broadview Park.
Window Replacement in Broadview Park
Replacing windows in Broadview Park usually means removing original jalousies or single-hung aluminum units from masonry openings, re-pointing the concrete block where decades of moisture have done their work, then anchoring impact-rated replacements built for Miami-Dade wind loads. We match the product to the opening, not the other way around, and the written quote includes the stucco repair that every block-home replacement requires. This is a retrofit job, not a swap. Window Replacement in Broadview Park
Window Repair in Broadview Park
Broadview Park repair calls often involve jalousie mechanisms that have seized from salt air and humidity, cracked glass in old aluminum frames, or failed seals that fog between panes. On canal lots, we see rusted hardware long before inland homes do, which is why we check the fasteners, not just the glass. Every repair carries a written guarantee; if it fails, the second visit is free. Window Repair in Broadview Park
Front Door Replacement in Broadview Park
Front doors in Broadview Park’s block ranches shift as the slab settles and the humid seasons expand framing, so a replacement often requires adjusting the rough opening, not just hanging a new slab. We install impact-rated doors that resist wind-driven rain, and we flash them for the heavy downpours this area gets. You get a written price before we start, and the work is covered by the 365-Day Done Right Promise. Front Door Replacement in Broadview Park
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Broadview Park
We install and service windows and doors from PGT, CGI, CWS, and ES Windows, among the professional-grade lines we carry. We stock common replacement parts locally and order specialty components with clear lead times. See our brands for the full line card.
Pricing for Window Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Single window glass replacement | $180 – $340 |
| Full-frame window replacement (impact-rated) | $850 – $1,600 per opening |
| Jalousie-to-impact conversion (masonry retrofit) | $1,100 – $2,200 per opening |
| Sliding glass door replacement (impact-rated) | $2,400 – $4,800 |
| French door replacement (impact-rated) | $2,800 – $5,500 |
| Front entry door replacement (impact-rated, installed) | $1,900 – $4,200 |
| Window screen replacement | $45 – $120 per screen |
| Window hardware repair (crank, latch, balance) | $120 – $280 per window |
| Seal / weatherstripping replacement | $90 – $220 per window |
| Stucco repair around window or door opening | $200 – $600 per opening |
What pushes Broadview Park pricing up is the masonry work: re-pointing block, bucking out non-standard openings, and stucco patching that inland wood-frame jobs never see. You get a written, line-item price before any work starts, and that number does not move once we begin.
Neighborhoods We Serve in Broadview Park
Our crews work throughout Broadview Park, from the canal-side streets near the eastern edge to the quieter blocks closer to the Everglades. Because we schedule from the Miami (South FL) office with local crews, response times across the community are typically same-day or next-day for estimates.
- Broadview Park central residential blocks
- Canal-adjacent streets along the community’s drainage network
- The western blocks near the unincorporated Broward border
- Mobile home and small multifamily lots scattered throughout the area
- Streets nearest the Fort Lauderdale line on the east side
Service Area – Cities Near Broadview Park
Beyond Broadview Park, Hale Windows & Doors serves homeowners across central and southern Broward and northern Miami-Dade. If you’re nearby and want the same written pricing and Threshold Standard technician process, we cover Miami, FL, Hialeah, FL, Fort Lauderdale, FL, and Pembroke Pines, FL.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Broadview Park
Broadview Park estimates are typically scheduled same-day or next-day. We coordinate from the Miami (South FL) office and send a named, photo-badged technician to your door, so you know who’s coming before the truck pulls up. Call (252) 675-6980 to schedule your free estimate.
Most window and door replacements in Broward County require a permit, and impact-rated work must meet Florida Product Approval and Miami-Dade NOA standards. Hale handles the permit pull and inspection coordination as part of the job, and we confirm the specifics in your written quote.
Usually, yes. Broadview Park’s masonry ranches often need re-pointing around the rough opening, and stucco repair after the new frame is anchored. That work is included in your written price, not added as a surprise charge once the job starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Honest quote with the glass type and U-factor spelled out. Didn't need the triple pane and he told me so."
- Diane O."Fogged double pane in the living room. They replaced the glass units only, not the whole frame, and saved me a lot."
- Raul C."One sash would not stay up. He rebuilt the balance and now it slides like new."
- Yvonne T.