Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Windows & Doors in Long Beach, CA | Hale Windows & Doors
We service PGT windows and doors throughout Long Beach, from the 1920s bungalows near downtown to the condo towers along Ocean Blvd. The one thing that makes PGT work different here is salt: marine air corrodes rollers, locks, and weatherstripping on ocean-facing units in ways you won’t see in Cerritos or Lakewood. If your PGT slider drags or your dual-pane fog has settled in, call Hale Windows & Doors at (252) 675-6980 for Window Repair in Long Beach. We service the unit, quote the repair in writing, and stand behind it with a 365-Day Done Right Promise.
Why Long Beach Residents Choose Us for PGT Service
We’re an independent shop, not a PGT dealer tied to pushing new units. That matters when your 2006 WinGuard slider has one seized roller and a fogged panel: we can replace the roller with stainless hardware and swap the glass while keeping the frame, rather than telling you the whole assembly needs to go. Spencer Odell, who leads our team, grew up re-glazing single-pane windows in Eagle Rock and spent years on job sites across Los Angeles County before building Hale Windows & Doors. He’s seen what ocean air does to aluminum and what cheap parts do on a second visit. We carry PGT OEM rollers, locks, and weatherstripping when it’s available, and we stock stainless and nylon aftermarket parts when OEM is discontinued or backordered. Every PGT sales & service call in Long Beach gets that same parts-first, repair-before-replace judgment.
Common PGT Windows & Doors Problems We Solve in Long Beach
- Seized rollers on PGT aluminum sliders. Salt spray off the water works into the steel rollers and hinge screws within a couple of years. Panels start to drag, then bind. On canal-front homes in Naples and Belmont Shore, we replace the originals with stainless hardware because that’s the difference between a one-time fix and a recurring call.
- Fogged dual-pane glass on older PGT vinyl and aluminum units. Marine-layer moisture cycling and year-round UV break down the seal between panes. The fog looks like trapped condensation, but it’s a failed seal. Once that happens, the glass loses insulating value and the only proper fix is replacing the insulated unit.
- Laminated impact glass delaminating at the edges. PGT WinGuard glass under sustained salt exposure can develop a hazy border where the laminate begins to separate. It’s a slow failure, but it worsens the longer it’s left. We can often swap the panel while keeping the original frame.
- Failed weatherstripping and corner caulk on ocean-facing sliders. Santa Ana wind events push wind-driven rain past old weatherstripping on canal-front units. The result is water in the track and eventually into the flooring. We restore the seal with PGT-spec weatherstripping and marine-grade caulk.
- Misaligned locks on PGT impact doors. When salt corrodes the lock body or the door settles slightly, the lock stops aligning with the strike plate. We replace worn lock hardware and re-align the panel so the door locks with a firm throw rather than a jiggle.
PGT Service in Long Beach: What Local Conditions Mean for Your Equipment
Long Beach sits directly on the Pacific, and the marine air here carries salt that lands on every window and door track facing the water. Your PGT units aren’t failing because they were installed wrong; they’re failing because steel rollers, hinges, and set screws corrode faster in Naples and Belmont Shore than they do ten miles inland. We’ve serviced PGT WinGuard sliders on canal-front homes where the original steel rollers seized solid within two years of install. The fix that lasts is stainless hardware, full stop. Spencer’s line on this is simple: measure twice, order once – then make sure the opening was built to code in the first place. If you own a PGT slider within a few blocks of the ocean in Long Beach and the door drags, the salt has already started its work.
PGT Models & Products We Service in Long Beach
We service PGT WinGuard Aluminum Impact-Resistant windows and doors, PGT Aluminum Series horizontal rollers and 3-panel sliders, PGT Vinyl Series single-hung and double-hung replacement windows, and PGT Colonial Series vinyl windows. Our approach is parts-first: OEM PGT hardware when it ships quickly, and proven stainless or nylon aftermarket replacements when OEM is discontinued. We also offer Horizontal Roller & Sliding Impact Window service, Single Hung Impact Window repair, and Window Maintenance & Care for PGT units throughout Long Beach. Our Long Beach service area covers the entire city, including the historic districts where replacement rules get tight.
PGT Service Pricing in Long Beach
PGT service pricing in Long Beach depends on what failed and whether we’re repairing or replacing the unit, including our Window Replacement in Long Beach. Here’s what homeowners should budget:
- Roller replacement on a PGT slider: $150 to $350 per panel, depending on whether we’re installing stainless hardware and how many rollers are shot.
- Dual-pane glass replacement (not full window): $300 to $700 per unit, depending on glass size and whether it’s impact-rated or standard laminated glass.
- Weatherstripping and caulk restoration: $180 to $450 per door or window, depending on linear footage and how much of the old seal is failing.
- Full PGT window or door replacement: $900 to $2,800 per unit, depending on series, size, and whether the opening needs reframing.
These ranges aren’t quotes, but they’re the numbers we typically see in Long Beach. Your written estimate arrives before any work begins, so the number you approve is the number you pay. Call (252) 675-6980 for a free estimate.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Windows & Doors in Long Beach
Yes, and it does it on a two- to five-year clock near the water, not the ten- to fifteen-year clock you’d see inland. Steel rollers, hinge screws, and lock bodies corrode from ocean salt spray, which is why we stock stainless replacements for Long Beach jobs. If your unit is within a quarter mile of the shoreline, plan on hardware replacement more often. Call (252) 675-6980 and we’ll inspect what’s wearing.
Yes, in most cases the individual panel can be swapped while keeping the original frame. The hazy border is delamination where the laminate is separating from the glass, and it gets worse over time in salt air. We replace the glass with a new impact-rated panel rather than the whole window, which saves you significant money in Long Beach. Call (252) 675-6980 if you see that haze starting.
Usually yes, by using an insert replacement that keeps the original opening dimensions instead of a full-frame unit. Long Beach’s historic landmark ordinances can delay or deny a full-frame replacement on prewar bungalows near downtown, so the detail that matters is the opening size. We measure for an insert that matches the existing frame, which is often the only option that clears review. Call (252) 675-6980 if you’re in a historic district and unsure what’s allowed.
Every 12 to 18 months for units within a mile of the ocean, and every 24 to 36 months for locations inland. Maintenance in Long Beach means cleaning salt residue from tracks, checking rollers and hinges for corrosion, and re-sealing any weatherstripping that’s started to crack. Skipping this in the marine air means bigger problems later. Call (252) 675-6980 for a free inspection and we’ll tell you what needs attention.
Insert replacements or PGT Vinyl Series single-hung and double-hung units that match the original opening dimensions. Full-frame replacement on those older bungalows often runs into historic-district review, and the original openings are rarely square or standard. An insert keeps the original trim and framing while giving you a new, sealed unit. Call (252) 675-6980 and we’ll measure before you order anything.
Service Areas Near Long Beach
We serve Long Beach plus Lakewood, Signal Hill, Seal Beach, Cerritos, and the surrounding Los Angeles County communities. If you’re a bit further out, we also have PGT service in Oakland and PGT service in Anaheim for readers beyond our immediate service radius.
Book Your PGT Service in Long Beach Today
Call Hale Windows & Doors at (252) 675-6980 for a free estimate on your PGT windows and doors. We’ll show up on time, put the price in writing, and fix it right the first time – or we’ll make it right under the 365-Day Done Right Promise.
Written by Spencer Odell, Owner at Hale Windows & Doors, serving Long Beach since 2009.